Cosmetic & Personal Care Packaging
Integrated filling and packaging systems for serums, creams, lotions, perfumes, essential oils, nail polish, roll-on products and other cosmetic formulations—configured around your product, container, closure and required output.
Build a production solution around your formulation, container and finished-pack requirements. ZONESUN can evaluate product preparation, filling, component insertion, closing, labeling and secondary packaging as a coordinated system, from compact filling cells to integrated lines.
Configure dosing and bottle handling for compatible cosmetic liquids. Coordinate filling with insert placement, dropper assembly, capping and labeling according to the actual bottle and closure design.
Explore Dropper Bottle Packaging →Match product transfer and filling to viscosity, temperature and foaming behavior. Evaluate mixing, heating or emulsifying where required, then coordinate container filling, closing and final presentation.
Explore Face Cream Packaging →Configure filling and sprayer closing around the bottle neck, closure and formulation. Review any mixing, cooling or filtration stages and define the required equipment configuration for alcohol-based products.
Explore Perfume Filling & Closing →Coordinate small-volume dosing with component insertion and closure handling. Wipers, roller balls, brushes and other assemblies require positioning and feeding arrangements matched to the package.
Explore Roll-On Bottle Packaging →Select dedicated filling and sealing equipment for the chosen packaging material and format. Confirm tube or pouch feeding, filling access, seal quality and coding with representative packaging samples.
Explore Facial Mask Packaging →Evaluate heated product handling, filling and cooling for compatible formulations. Match the process to molds or final containers, including demolding, assembly or decorative filling where required.
Explore Cosmetic Stick Filling & Cooling →Define the operations your project needs, then select the equipment and interfaces for each stage. The final scope is established in the line configuration and quotation.
Match the package assembly: Screw caps, droppers, pumps, crimp sprayers, roller-ball inserts and tube seals use different closing arrangements. Provide the complete packaging assembly so every required step can be included.
Plan for product changeovers: Review access to product-contact parts, draining, cleaning and replacement components. Define the procedure for changing formulations, fragrances, colors, fill sizes and packaging formats.
Share formulation details, packaging samples and production targets so the filling method, component handling and factory layout can be evaluated together.
Evaluate complete-line performance: Match filling, component feeding, closing, labeling and cartoning to the same output target. Include product replenishment, manual handling and changeovers when assessing achievable production capacity.
Compatibility depends on the dosing system, product-transfer arrangement, formulation and required fill range. Provide samples of each product so filling performance, cleaning and any necessary changes can be evaluated.
This depends on the equipment range and available change parts. Review every container and closure format, including feeding tracks, positioning fixtures, filling nozzles, capping tools and labeling settings.
Product preparation and packaging are separate equipment stages that can be coordinated in a project. Confirm which tanks, mixers, transfer systems and packaging machines are included in the quotation.
These assemblies require different feeding, placement and closing mechanisms. Send the complete bottle and closure samples to confirm the required operations and whether separate equipment or change parts are needed.
Use representative formulations and complete packaging samples. Agree on dose variation, dripping, container cleanliness, component placement, closing quality, label position and output before acceptance testing.
Integration can be evaluated using your current equipment specifications, floor plan, transfer heights, production speed and control interfaces. Identify which stages are already available and which need to be added or upgraded.
