Parameter:
Air pressure: 0.4-0.6Mpa
Tape size: (16-19)x(0.63-0.9)mm
Tensioning force: 3000N
Feature:
Light weight ,easy operation, safety and reliable ,excellent performance and so on.
All actions of tensioning ,sealing and breaking can be finished with one hand.
It is widely used in every kind of bundling of steel and non-ferrous metal materials.
Notice
It must adjust the air pressure within the range of 0.4MPa to 0.6MPa to obtain enough air pressure,otherwise, it will effect the working performance.
Be careful the interval between feed wheel and rolling plate teeth should be within 0.1-0.3mm,otherwise, it need be adjusted.
NOTE
Air compressor required, Sold separately.
Powerful Pneumatic Strapping
A high-quality motor and high-power cylinder support automatic tensioning, locking, cutting, and tightening for efficient bundling.
Durable Air Connection
The air-pump connector uses an alloy pipe joint, while the rubber air hose includes alloy fittings for wear resistance and efficient operation.
Strong Locking and Cutting Components
The high-strength steel lock clip provides high tensile strength. Insert the strap and press the tension switch until tight, then press the lock switch to close the latch. The alloy cutter is wear-resistant for long service life.
Strapping Preparation and Tensioning
Place the lock on the steel strap, wrap the strap around the item, and feed it through the lock. Connect the air supply, position the machine over the strap, and press the tension switch to tighten it.
Locking, Cutting, and Tension Adjustment
Press the lock switch to secure and cut the strap. The tightening force can be adjusted with the screw: turn it clockwise to increase compressed-air flow and tightening force.
