Product & Process
Define the formulation, ingredient sequence, viscosity at processing temperature and desired result. Blending, dispersion, emulsification and air removal are different process objectives.
Prepare liquids, creams, sauces and other materials with integrated equipment for mixing, emulsifying, heating, cooling, storing and filtration.
Available for food, cosmetics, pharmaceuticals and chemical products, with customizable tank capacity, material, temperature control and processing functions.
Match mixing, emulsifying, temperature control, storage and filtration to the product you need to make. A preparation system should deliver the required batch condition and feed the next operation at a suitable rate.
Define the formulation, ingredient sequence, viscosity at processing temperature and desired result. Blending, dispersion, emulsification and air removal are different process objectives.
Specify minimum and maximum working batches. Include ingredient additions, foam and process headspace rather than selecting only by the vessel's total volume.
Plan how material leaves the vessel, travels through any filter and reaches storage or filling. Include hold time, temperature and cleaning between batches.
Several functions may be combined in one system. Select each function according to the product and required processing result.
| Function | Main Purpose | When to Evaluate It | Key Selection Checks |
|---|---|---|---|
| Agitation & Blending | Moves material through the vessel to combine ingredients or maintain distribution. | Liquid blending, compatible dissolving duties and maintaining product uniformity. | Viscosity, impeller design, circulation, working level and shear sensitivity. |
| High-Shear Emulsifying | Applies localized shear using a suitable rotor-stator or other specified mechanism. | Dispersing ingredients or forming emulsions where the formulation requires shear. | Formulation, feed sequence, viscosity, target dispersion and product temperature. |
| Vacuum Processing | Processes material below atmospheric pressure, with air removal where the process permits. | Products requiring reduced entrained air or a defined vacuum mixing step. | Vessel rating, operating vacuum, seals, foam, volatility and vacuum-system compatibility. |
| Heating & Cooling | Controls the product temperature through an appropriate heat-transfer arrangement. | Melting, viscosity control or a specified heating and cooling sequence. | Temperature range, cycle time, heat sensitivity, utilities and heat-transfer area. |
| Storage & Buffering | Holds prepared material between process stages. | Separating batch preparation from downstream filling or transfer. | Hold time, settling, temperature, agitation if needed, discharge and cleaning. |
| Filtration & Transfer | Moves material and removes selected particles through a defined filtration stage. | Products with an agreed clarification or particle-removal requirement. | Viscosity, intended particle retention, filter rating, pressure drop and transfer duty. |
Define the result: High mixer speed alone does not establish emulsion stability or a particular particle size. Vacuum does not establish a sterile process, and ordinary heating is not a validated pasteurization cycle. Agree on the actual product requirements and trial criteria.
Review working volume, vessel geometry, contact surfaces, seals and drainability. Stainless steel or polymer construction must suit the formulation, temperature and cleaning agents.
Specify bulk agitation, scraper action or high-shear processing as required. Motor selection depends on the mixing duty and product behavior, not volume alone.
Confirm the heating method, cooling utilities, sensor location and operating limits. A jacket does not by itself establish a particular heating or cooling time.
Where required, define operating vacuum, charging ports and ingredient feeding. Include foam or vapor handling and the equipment's pressure limits.
Match outlet size, pump, pipework and filtration to viscosity, particles and flow requirements. Consider residual product and access for cleaning.
Define speed and temperature controls, alarms and recipe functions where required. Confirm access, removable parts and any specified cleaning system.
Explore mixing tanks and emulsifying configurations for compatible liquids, creams and pastes.
Explore Mixing Equipment →Review dedicated dry-material mixing equipment according to powder flow and blending requirements.
Explore Dry Mixing →Explore material-handling equipment selected for the product and transfer arrangement.
Explore Feeding Equipment →Share the formulation characteristics and process sequence to help define the vessel, mixer, utilities and transfer connections.
Special conditions: Provide the product SDS where applicable, including flammable ingredients or corrosive materials. Vessel construction, drives, heating, vacuum and electrical equipment must be reviewed for the specified operating conditions.
Send your material details, working batch size and processing requirements through the chat window, or contact ZONESUN to discuss a configuration.
Discuss Your Preparation SystemNo. A tank with an agitator provides a specified mixing action; emulsifying systems may add a high-shear process head and other functions. Select from the formulation and required result. Some configurations combine bulk agitation, scraping and emulsification.
Use the required working batch range and confirm the vessel's total capacity separately. Consider impeller coverage, circulation, ingredient additions, foam and vacuum headspace. Also include charging, processing, discharge and cleaning in the batch cycle.
Only within the specified operating range. Viscosity, yield behavior, particles and temperature affect agitation, motor load and discharge. Provide the complete product list so the mixer and transfer system can be evaluated for each duty.
The achievable result depends on viscosity, temperature, mixing action, vacuum level and processing time. Volatile ingredients and foaming also affect operation. Define an acceptance target and evaluate the actual formulation.
No. Cleaning performance depends on coverage, flow, chemistry, temperature, duration and equipment geometry. Confirm the cleaning method and how it will be checked for the product. A spray device or connection alone does not establish a validated cleaning cycle.
Review the product condition at discharge, pump duty, line pressure, transfer distance and filler inlet requirements. Buffer storage or level control may be needed to coordinate a batch preparation process with filling.
This category focuses on processing the product before filling. Bottle washing, air rinsing, unscrambling and bottle blowing handle the container and should be specified separately when planning the complete line.