Before Filling & Packaging

Material Preparation Equipment

Prepare liquids, creams, sauces and other materials with integrated equipment for mixing, emulsifying, heating, cooling, storing and filtration.

Mixing & Blending Emulsifying Heating & Cooling Storage & Filtration

Available for food, cosmetics, pharmaceuticals and chemical products, with customizable tank capacity, material, temperature control and processing functions.

16 produkter
Vacuum homogenizer mixer

ZONESUN ZS-LTR500 Vacuum Industrial Cream Mixing Homogenizer

Pris
$52,000
ZONESUN EMULSIFICATION MACHINE

ZONESUN ZS-EM300 Vacuum Emulsifying Mixer for Creams & Liquids

Pris
$29,800
ZONESUN ZS-MB300L3 Triple Tank Mixing System for High Viscosity Sauce, Paste and Emulsion Production with Vacuum Mixing and Heating

ZONESUN ZS-MB300L3 Triple Tank Mixing System for High Viscosity Sauce, Paste and Emulsion Production with Vacuum Mixing and Heating

Pris
$25,699
ZONESUN ZS-EM2 300L Emulsifying Mixing Tank with Anchor Scraper Agitator High-Speed Emulsifier and Dual Rotor Pumps for Food Cosmetic and Pharmaceutical Production

ZONESUN ZS-EM2 300L Emulsifying Mixing Tank with Anchor Scraper Agitator High-Speed Emulsifier and Dual Rotor Pumps for Food Cosmetic and Pharmaceutical Production

Pris
$14,499
ZONESUN Vacuum Heating Mixing Machine

ZONESUN ZS-VM500 Vacuum Heating Mixer for Cosmetics & Food

Pris
$8,000—$18,399
Vacuum Emulsifying Mixer Tank

ZONESUN ZS-VMB200RH Cosmetic High Shear Mixer Vacuum Emulsifying Mixer Tank for Cream Lotion Ointment Sauce Homogenizing Heating Cooling

Pris
$11,699
ZONESUN ZS-MB1000L Stainless Steel Paste Heating & Mixing Tank

ZONESUN ZS-MB1000L Stainless Steel Mixing & Heating Tank Machine

Pris
$869—$3,849
ZONESUN ZS-PPMT1500L PP Mixing Tank for Corrosive Liquid

ZONESUN ZS-PPMT1500L PP Mixing Tank for Corrosive Liquid

Pris
$2,799
Industrial Cooker

ZONESUN ZS-CG200L 200L Cooking Mixer Tank

Pris
$2,150—$2,799
mixing tank

ZONESUN ZS-PMT100L Pneumatic Mixing Tank for Liquid & Emulsion Blending

Pris
$1,200—$2,350
milk cooling tank

ZONESUN ZS-CT200L Stainless Steel Milk Cooling and Mixing Tank with CIP

Pris
$5,889.99
ZONESUN ZS-ST1500L Stainless Steel Storage Tank Material Hopper

ZONESUN ZS-ST1500L Stainless Steel Storage Tank with Tilted Bottom Design

Pris
$2,499
ZONESUN ZS-PRT100L Milk Pasteurization Tank with Heating and Cooling

ZONESUN ZS-PRT100L Milk Pasteurization Tank with Heating and Cooling

Pris
$7,199—$13,499
automatic perfume front-end purification line

ZONESUN ZS-FAL180W Automatic Perfume Mixing Cooling and Filtration Line Fragrance Production Equipment

Pris
$12,700
ZONESUN ZS-PRT200 Plate Type Pasteurizer & UHT Sterilizer Machine

ZONESUN ZS-PRT200 Plate Type Pasteurizer & UHT Sterilizer Machine

Pris
$37,999—$70,999
ZONESUN ZS-MB200LH SUS304 Stainless Steel Electric Heating and Mixing Tank

ZONESUN ZS-MB200LH SUS304 Stainless Steel Electric Heating and Mixing Tank

Pris
$2,699

Prepare Your Product for the Next Production Stage

Match mixing, emulsifying, temperature control, storage and filtration to the product you need to make. A preparation system should deliver the required batch condition and feed the next operation at a suitable rate.

Product & Process

Define the formulation, ingredient sequence, viscosity at processing temperature and desired result. Blending, dispersion, emulsification and air removal are different process objectives.

Working Batch Capacity

Specify minimum and maximum working batches. Include ingredient additions, foam and process headspace rather than selecting only by the vessel's total volume.

Transfer & Integration

Plan how material leaves the vessel, travels through any filter and reaches storage or filling. Include hold time, temperature and cleaning between batches.

Compare Material Preparation Functions

Several functions may be combined in one system. Select each function according to the product and required processing result.

Function Main Purpose When to Evaluate It Key Selection Checks
Agitation & Blending Moves material through the vessel to combine ingredients or maintain distribution. Liquid blending, compatible dissolving duties and maintaining product uniformity. Viscosity, impeller design, circulation, working level and shear sensitivity.
High-Shear Emulsifying Applies localized shear using a suitable rotor-stator or other specified mechanism. Dispersing ingredients or forming emulsions where the formulation requires shear. Formulation, feed sequence, viscosity, target dispersion and product temperature.
Vacuum Processing Processes material below atmospheric pressure, with air removal where the process permits. Products requiring reduced entrained air or a defined vacuum mixing step. Vessel rating, operating vacuum, seals, foam, volatility and vacuum-system compatibility.
Heating & Cooling Controls the product temperature through an appropriate heat-transfer arrangement. Melting, viscosity control or a specified heating and cooling sequence. Temperature range, cycle time, heat sensitivity, utilities and heat-transfer area.
Storage & Buffering Holds prepared material between process stages. Separating batch preparation from downstream filling or transfer. Hold time, settling, temperature, agitation if needed, discharge and cleaning.
Filtration & Transfer Moves material and removes selected particles through a defined filtration stage. Products with an agreed clarification or particle-removal requirement. Viscosity, intended particle retention, filter rating, pressure drop and transfer duty.

Define the result: High mixer speed alone does not establish emulsion stability or a particular particle size. Vacuum does not establish a sterile process, and ordinary heating is not a validated pasteurization cycle. Agree on the actual product requirements and trial criteria.

Key Elements of a Preparation System

Vessel & Contact Materials

Review working volume, vessel geometry, contact surfaces, seals and drainability. Stainless steel or polymer construction must suit the formulation, temperature and cleaning agents.

Agitator & Process Head

Specify bulk agitation, scraper action or high-shear processing as required. Motor selection depends on the mixing duty and product behavior, not volume alone.

Temperature Control

Confirm the heating method, cooling utilities, sensor location and operating limits. A jacket does not by itself establish a particular heating or cooling time.

Vacuum & Ingredient Addition

Where required, define operating vacuum, charging ports and ingredient feeding. Include foam or vapor handling and the equipment's pressure limits.

Discharge & Transfer

Match outlet size, pump, pipework and filtration to viscosity, particles and flow requirements. Consider residual product and access for cleaning.

Controls & Cleaning Access

Define speed and temperature controls, alarms and recipe functions where required. Confirm access, removable parts and any specified cleaning system.

Customize Your Material Preparation System

Share the formulation characteristics and process sequence to help define the vessel, mixer, utilities and transfer connections.

  • Material Characteristics Product type, viscosity at process temperature, density, solids, particles, foaming and chemical compatibility.
  • Process Objectives Blending, dispersing, emulsifying, heating, cooling, air removal or filtration, with the intended quality target.
  • Batch & Throughput Minimum and maximum working batches, required batches per shift and downstream filling demand.
  • Temperature & Vacuum Operating ranges, ingredient addition sequence, hold times, heat sensitivity and vacuum requirements.
  • Cleaning & Materials Cleaning procedure, cleaning agents, contact material requirements, access and changeover frequency.
  • Layout & Integration Floor plan, ceiling height, ingredient loading, utilities, transfer distance and connected filling equipment.

Special conditions: Provide the product SDS where applicable, including flammable ingredients or corrosive materials. Vessel construction, drives, heating, vacuum and electrical equipment must be reviewed for the specified operating conditions.

Send your material details, working batch size and processing requirements through the chat window, or contact ZONESUN to discuss a configuration.

Discuss Your Preparation System

Material Preparation Equipment FAQs

Is a mixing tank the same as an emulsifying machine?

No. A tank with an agitator provides a specified mixing action; emulsifying systems may add a high-shear process head and other functions. Select from the formulation and required result. Some configurations combine bulk agitation, scraping and emulsification.

How should tank capacity be selected?

Use the required working batch range and confirm the vessel's total capacity separately. Consider impeller coverage, circulation, ingredient additions, foam and vacuum headspace. Also include charging, processing, discharge and cleaning in the batch cycle.

Can one system handle thin liquids and thick pastes?

Only within the specified operating range. Viscosity, yield behavior, particles and temperature affect agitation, motor load and discharge. Provide the complete product list so the mixer and transfer system can be evaluated for each duty.

Does vacuum mixing remove all air?

The achievable result depends on viscosity, temperature, mixing action, vacuum level and processing time. Volatile ingredients and foaming also affect operation. Define an acceptance target and evaluate the actual formulation.

Does a CIP connection mean the equipment cleans itself completely?

No. Cleaning performance depends on coverage, flow, chemistry, temperature, duration and equipment geometry. Confirm the cleaning method and how it will be checked for the product. A spray device or connection alone does not establish a validated cleaning cycle.

Can preparation equipment connect to a filling machine?

Review the product condition at discharge, pump duty, line pressure, transfer distance and filler inlet requirements. Buffer storage or level control may be needed to coordinate a batch preparation process with filling.

Is bottle washing part of material preparation?

This category focuses on processing the product before filling. Bottle washing, air rinsing, unscrambling and bottle blowing handle the container and should be specified separately when planning the complete line.