Description
The ZONESUN ZS-AGD6 Automatic 360° Rotary Glue Dispensing Machine is designed for controlled circular adhesive application on round, cylindrical and ring-shaped workpieces. The workpiece rotates while the dispensing nozzle is positioned at the required path, helping create a repeatable full-circle adhesive bead.
Adjustable rotary speed, X/Y/Z fine adjustment, digital timing control and a 0.8L stainless-steel pressure tank support setup for compatible speaker housings, motors, cosmetic caps, LED components, sensors, connectors and other circular parts.
Technical Specifications
| Model | ZS-AGD6 |
|---|---|
| Drive Type | Pneumatic |
| Maximum Workpiece Rotation Diameter | Φ120–Φ150mm (adjustable via three-jaw chuck; supports workpieces from several mm to over 100mm) |
| Mechanical Repeatability | ±0.01–±0.02mm |
| Rotary Drive System | High-precision stepper motor or servo motor |
| Motor Speed | 10–200 rpm (adjustable) |
| Fine Adjustment Stroke (X/Y/Z) | 50 × 50 × 50mm |
| Control Mode | Automatic / Timed / Manual |
| Dispensing Time Range | 0.01–99.99 s |
| Operating Frequency | >100 cycles/min |
| External Air Pressure | 0.1–0.7 MPa (recommended: 0.5 MPa) |
| Pressure Tank | 0.8L stainless steel |
Performance note: The original parameter values above are retained unchanged. Final bead width, glue volume and repeatability depend on adhesive viscosity, air pressure, nozzle size, rotation speed, fixture concentricity and dispensing-time settings.
0.8L Stainless-Steel Pressure Tank
Provides a stable adhesive supply to the dispensing nozzle for compatible materials.
360° Circular Dispensing
The rotary fixture turns the workpiece while adhesive is dispensed around the required circumference.
3-Axis Fine Adjustment
X/Y/Z adjustment helps position the nozzle relative to the workpiece and target glue path.
Dispensing & Pressure Controls
Rotation speed, dispensing time and air pressure can be tuned for the adhesive and target bead.
How It Works
Secure Workpiece → Position Nozzle → Set Rotation / Time / Pressure → Rotate & Dispense → Inspect Bead
Best-Suited Applications
Suitable for circular bonding or sealing on compatible speakers, motors, caps, lighting components, sensors, connectors and similar round parts.
Needs separate evaluation: non-circular glue paths, two-component adhesives requiring automatic ratio mixing, very fast-curing materials, or workpieces that cannot be held concentrically.
Before Ordering
- Workpiece diameter and photos
- Glue type and viscosity
- Required bead width and glue path
- Required cycle rate
- Whether a custom fixture is required
- Available compressed air
Frequently Asked Questions
Can the rotary speed be adjusted?
Yes. The original specification lists 10–200 rpm.
Does it require compressed air?
Yes. The specified range is 0.1–0.7 MPa, with 0.5 MPa recommended.
Can it dispense on non-round products?
This model is primarily intended for circular paths; other paths should be evaluated separately.
