ZONESUN ZS-MG260XP Dual-Head Gear Pump Liquid Filling Machine
The ZONESUN ZS-MG260XP automatic dual-head gear pump liquid filling machine is designed for large-volume filling of water-like to medium-viscosity liquids into bottles and containers. Two independently controlled gear pump filling heads support a filling range of 2.5–10 L. The listed maximum production capacity is 150 L/min, depending on pump flow rate; actual container output depends on the liquid, fill volume and operating cycle.
A 45 L hopper, automatic liquid feeding and PLC touchscreen control support continuous production with reduced manual refilling. The machine also features pneumatic bottle positioning, an anti-drip collection tray and a chain conveyor. An external air compressor is required and must be purchased separately.
Technical Specifications
| Model | ZS-MG260XP |
|---|---|
| Power Supply | 220 V |
| Power | 3 kW |
| Air Pressure | 0.6 MPa |
| Production Capacity | Max. 150 L/min (depending on pump flow rate) |
| Filling Heads | 2 (Customizable) |
| Filling Volume | 2.5–10 L |
| Filling Method | Gear Pump Filling |
| Feeding System | 45 L Hopper |
| Chain Conveyor (L × W) | 2 m × 190 mm |
| Conveyor Direction | Right to Left |
| Machine Dimensions (L × W × H) | 2000 × 1000 × 1800 mm |
| Machine Weight | 300 kg |
Applications
Suitable for compatible water-like to medium-viscosity liquids used in food, beverages, cosmetics, household chemicals and industrial liquid packaging. Provide the liquid properties, required fill volume and container dimensions to confirm product-contact compatibility and the appropriate configuration before ordering.
Machine Details
Touchscreen Control Panel
Allows operators to set filling parameters, adjust operating settings, and monitor machine operation through an intuitive touchscreen interface.
Dual-Head Gear Pump Filling System
Two gear pump filling heads deliver controlled liquid volumes for consistent filling accuracy and efficient production.
Anti-Drip Collection Tray
Collects residual liquid from the filling nozzles between filling cycles, helping keep the bottles and conveyor clean.
Bottle Pushing Cylinder
Uses a pneumatic cylinder to push bottles from the incoming conveyor into the filling area for accurate positioning and continuous operation.
Large-Capacity Material Hopper
Stores a large volume of liquid and continuously supplies the filling system, reducing frequent refilling during production.
Material Feeding System
Automatically transfers liquid from an external supply source into the hopper, ensuring a stable material supply and reducing manual refilling during production.
Key Features
- Two independently controlled gear pump filling heads; head quantity is customizable
- 2.5–10 L filling range for large-volume containers
- 45 L material hopper with automatic liquid feeding
- PLC touchscreen for filling parameters and operating settings
- Pneumatic bottle positioning and residual-liquid collection tray
- 2 m × 190 mm chain conveyor, running from right to left
How the Filling Process Works
- Confirm the liquid, container, target filling volume and required utilities before setup.
- Adjust bottle positioning and filling-head alignment for the container, following the operating manual.
- Connect the external material supply and use the feeding system to supply the hopper.
- Set filling parameters and operating settings on the PLC touchscreen.
- Run a test batch, checking fill volume, container positioning and residual dripping; adjust settings as needed.
- Begin continuous operation and monitor liquid supply, bottle transfer and the collection tray.
How to Choose the Right Filling Configuration
Share your liquid name, viscosity or a sample, filling temperature, target volume, container dimensions and required bottles per minute. Confirm the required filling-head quantity, available 220 V supply, 0.6 MPa compressed-air supply and right-to-left conveyor layout. If capping or labeling equipment is needed, provide cap and label details so line compatibility can be assessed.
Frequently Asked Questions
What liquids can the ZS-MG260XP fill?
It is designed for compatible water-like to medium-viscosity liquids. Suitability for a particular food, cosmetic, household or industrial liquid should be confirmed from its properties and the selected machine configuration.
What is the filling volume range?
The specified filling range is 2.5–10 L. Provide your target volume and container dimensions for configuration confirmation.
Does 150 L/min mean a fixed number of bottles per minute?
No. The listed maximum production capacity of 150 L/min depends on pump flow rate and is expressed as liquid volume per minute. Actual bottles per minute also depend on filling volume, liquid properties, bottle positioning and the complete operating cycle. Confirm output with your application.
Can the two filling heads be controlled independently?
Yes. The machine has two independently controlled gear pump filling heads. The number of filling heads can also be customized according to production requirements.
Does the machine automatically refill the hopper?
The feeding system automatically transfers liquid from an external supply source into the 45 L hopper, reducing manual refilling during production. Confirm the external supply arrangement for your installation.
Is an air compressor required?
Yes. An external air compressor is required and must be purchased separately. The listed operating air pressure is 0.6 MPa. The machine requires a 220 V power supply and has a listed power of 3 kW.
Related Packaging Equipment
For different filling volumes or product viscosities, compare these alternatives and confirm suitability for your application:
- ZONESUN ZS-DTMP4 4 Nozzles Automatic Magnetic Pump Liquid Filling Machine
- ZONESUN ZS-YT8T-8PX Automatic 8-Head Servo Piston Filling Machine For Ketchup Shampoo
For liquid compatibility checks, custom configurations or a quotation, use the online chat window on this page to speak with ZONESUN. Share your liquid, filling volume, container dimensions and target output for assistance.
